Casting to a Smart TV
How to cast your LumiFrame slideshow to a TV using Chromecast, AirPlay, or a smart TV's own casting, covering setup, controls, and troubleshooting.
You don't need the LumiFrame app on your TV to show a slideshow. From an iPhone, iPad, or Android device, you can cast to Chromecast, Apple TV, AirPlay-compatible TVs, and smart TVs on your local network.
Premium feature: Casting needs a Premium or Elite plan. On the Free plan, slideshows play on the device running LumiFrame.
#Supported ways to cast
The Casting screen lists each TV it finds, with one row for each way to reach it:
- Chromecast: Chromecast devices, and TVs with Chromecast built in.
- AirPlay: Apple TV and AirPlay-compatible TVs, from an iPhone or iPad.
- Smart TV: TVs that can play media sent over your local network, including many Samsung, LG, and Sony models.
LumiFrame prepares your slideshow first, including its transitions, backgrounds, and motion, then sends it to the TV.
#Starting a cast
Casting starts from a frame. If your device isn't one yet, LumiFrame offers to add it. See Your Frames.
- Open the menu (the grid of dots at the top left) and tap Albums.
- Tap the cast button at the top of the screen.
- Wait a few seconds while LumiFrame scans your network, then select your TV under Available Devices.
- Confirm on your TV if it asks.
- Choose an album and wait for it to prepare and start.
Tip: Make sure your device and the TV are on the same Wi-Fi network.
#Controlling a cast
While you're casting, the Casting screen shows Now Casting with a preview and a volume control. Open Cast Remote for more:
- Change Albums: Pick what plays on this TV.
- Slideshow Settings: Adjust timing, transitions, and playback.
- Disconnect: End the cast.
#Mirroring your screen
If you can't find your TV in the list, tap Mirror Screen at the bottom of the Casting screen. This uses your device's own screen mirroring, so you don't need to scan.
#Getting the best quality
- Use a 5 GHz Wi-Fi network if you can. It handles video more smoothly than 2.4 GHz.
- Keep your device reasonably close to your Wi-Fi router.
#Troubleshooting
Tap Help & Tips on the Casting screen for the same advice inside the app.
#Your TV isn't in the list
- Confirm both devices are on the same Wi-Fi network.
- Restart the TV and your router, then scan again.
- Some older TVs need casting or media sharing turned on in their settings.
- If you use a firewall or VPN on your device, it may be blocking casting. Try turning it off.
#The cast disconnects during playback
- Check your Wi-Fi signal.
- Some TVs go to sleep after a while. Check your TV's power or sleep settings.
#There's no sound on the TV
- Check the volume control on the Casting screen, and that Mute Audio is off under Settings → Slideshow.
- Check the TV's own volume and audio settings.